60 Excellent Inventions in Metal Forming
Sold by Books Puddle, New York, NY, U.S.A.
AbeBooks Seller since 22 November 2018
New - Soft cover
Condition: New
Ships within U.S.A.
Quantity: 4 available
Add to basketSold by Books Puddle, New York, NY, U.S.A.
AbeBooks Seller since 22 November 2018
Condition: New
Quantity: 4 available
Add to basketpp. 455 Softcover reprint of the original 1st ed. 2015 edition NO-PA16APR2015-KAP.
Seller Inventory # 26378355517
60 novel approaches in metal forming are presented and explained in detail. Contributions from acknowledged international scientists representing the state-of-art in metal forming open a general view on recent results and a clear view on demands for new research initiatives.
Prof. Dr.-Ing. Dr.-Ing. E.h. A. Erman Tekkaya
Since 2007, A. Erman Tekkaya is Professor at the TU Dortmund University and Head of the Institute of Forming Technology and Lightweight Construction (IUL). Since 2011 he is senior coordinator of the MMT degree program, the Master of Science in Manufacturing Technology. Since October 2014 he is also Dean of the Faculty of Mechanical Engineering. A. Erman Tekkaya studied mechanical engineering at the Department of Mechanical Engineering at the Middle East Technical University in Ankara. He finished his PhD in 1985, at the Institute for Metal Forming Technology at University of Stuttgart, with honors. In 1988, the Habilitation (Üniversite docenti) at the TC Üniversite-ler Arası Kurul in Ankara followed. From 1986 to 2005 he worked at the Middle East Technical University in Ankara. After his time as Assistant and Associate Professor he became Full Professor in 1993. From 2005 to 2009 A. Erman Tekkaya was Professor and Head of the Manufacturing Engineering Department at the ATILIM University in Ankara. Until September 2013 he was the founding director of the Center of Excellence on Metal Forming in Ankara.
His research interests are metal forming technologies as bulk metal forming, sheet metal forming, bending and high speed forming, as also the modeling of metal forming processes and material characterization. In recognition of his contributions in the field of metal forming he was awarded the honorary degree Doktor-Ingenieur Ehren halber (Dr.-Ing. E.h.) by the Faculty of Engineering of Friedrich-Alexander- University in Erlangen - Nürnberg in 2012. In October 2014 he was awarded the International Prize for Research & Development in Precision Forging of the Japanese Society of Technology of Plasticity for process innovation, process characterization and international Leadership.
A. Erman Tekkaya is member of numerous national and international committees and cherishes memberships tonational and international scientific academies and associations. A. Erman Tekkaya is "Editor-in-Chief" of the Journal of Materials Processing Technology of Elsevier for 7 years. According to Scopus, his h-factor currently is 20 and the number of citations to his publications is 1600.
Prof. Dr.-Ing. Werner Homberg
W. Homberg is a professor at the University of Paderborn since 2007 and managed the Chair of Forming and Machining Technology (LUF) in the Department of Mechanical Engineering. There he is chairman of the Commission “Strategy and Resources” and member of the Committee for Planning and Finance at the University of Paderborn. He studied mechanical engineering at the Technical University of Dortmund. After his completion of studies, he worked as a research co-worker at the Institute of Forming Technology and Lightweight Construction (IUL) in the field of sheet metal forming. In this field, he graduated with honors in the year 2000. Subsequently, he worked as a senior engineer at the IUL and was mainly responsible for the coordination of research.
Current research focus from W. Homberg is in the areas of sheet metal- and profile-forming, forming of hybrid respectively high-strength materials and also incremental forming processes. In the area of incremental sheet metal-/profile-forming, W. Homberg developed a new forming process, called friction-spinning, in the year 2009.
W. Homberg assumes the function as reviewer in the context of national and international research funding and is member of the working group of forming technology (AGU) in Germany.
Prof. Dr.-Ing. Alexander Brosius
In July 2012 Alexander Brosius became a full Professor as head of the Chair of Forming and Machining Processes (FF) at the Technische Universität Dresden (TU Dresden). He has been a CIRP Research Affiliate since 2009 and is involved in project evaluations for the DFG as an expert reviewer.
Before beginninghis studies of mechanical engineering at the University of Applied Sciences in Berlin in 1993 specializing in construction, Alexander Brosius has completed a three-year vocational training as industrial tool maker at Siemens AG in Berlin. In 1997 he became a research assistant at the Chair of Construction and Manufacturing at Brandenburg University of Technology in Cottbus before joining the Chair of Forming Technology at University of Dortmund in 1998 as part of the technical staff while completing his advanced degree specializing in production technology.
In 2002 Alexander Brosius became research assistant at the Institute of Forming Technology and Lightweight Construction (IUL) at the University of Dortmund where he received his doctorate (Dr.-Ing.) with honors in 2005 for his thesis on “A Method for the Determination of Strain-Rate-Dependent Flow Curves by Means of Electromagnetic Tube Forming an Iterative Finite-Element-Analysis”.
He continued his work in research at the IUL as a department manager for the group of high speed forming and joining and later as chief engineer for research. In 2011 he was awarded the title of Assistant Professor (Juniorprofessor) for “Modelling and Simulation in Forming Technology and Lightweight Construction” at the Technical University of Dortmund from where he received his call to TU Dresden in 2012.
His research interests are metal forming technologies, material characterization and simulation methodology with a special focus on hybrid processes and process chains for property oriented manufacturing.
"About this title" may belong to another edition of this title.
We accept return for those books which are received damamged. Though we take appropriate care in packaing to avoid such situation.
If you are a consumer you can cancel the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
INFORMATION REGARDING THE RIGHT OF CANCELLATION
Statutory Right to cancel
You have the right to cancel this contract within 14 days without giving any reason.
The cancellation period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the the last good or the last lot or piece.
To exercise the right to cancel, you must inform us, Books Puddle, 244 Madison Ave, Suite # 405, 10016, New York, New York, U.S.A., +1 7183015977, of your decision to cancel this contract by a clear statement (e.g. a letter sent by post, fax or e-mail). You may use the attached model cancellation form, but it is not obligatory. You can also electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". If you use this option, we will communicate to you an acknowledgement of receipt of such a cancellation on a durable medium (e.g. by e-mail) without delay.
To meet the cancellation deadline, it is sufficient for you to send your communication concerning your exercise of the right to cancel before the cancellation period has expired.
Effects of cancellation
If you cancel this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to cancel with contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to us or Books Puddle, 244 Madison Ave, Suite # 405, 10016, New York, New York, U.S.A., +1 7183015977, without undue delay and in any event not later than 14 days from the day on which you communicate your cancellation from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of cancellation
The right of cancellation does not apply to:
Model withdrawal form
(complete and return this form only if you wish to withdraw from the contract)
To: (Books Puddle, 244 Madison Ave, Suite # 405, 10016, New York, New York, U.S.A., +1 7183015977)
I/We (*) hereby give notice that I/We (*) withdraw from my/our (*) contract of sale of the following goods (*)/for the provision of the following goods (*)/for the provision of the following service (*),
Ordered on (*)/received on (*)
Name of consumer(s)
Address of consumer(s)
Signature of consumer(s) (only if this form is notified on paper)
Date
* Delete as appropriate.
| Order quantity | 12 to 19 business days | 12 to 14 business days |
|---|---|---|
| First item | £ 2.98 | £ 5.22 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.