Items related to Measurement of pulpal temperature while using resin...
Measurement of pulpal temperature while using resin luting cements: Temperature rise caused while luting ceramic restoration with various resin cements, bonding agents and light sources - Softcover
Synopsis
The desire for tooth colour restorations has moulded the evolution of aesthetic dentistry to its present challenging form. Presently, ceramics are one of the materials of choice which need dual cure resin cements. These cements during polymerization results in a temperature rise from exothermic reaction and light curing unit. Hence the objective is to compare the temperature rise in the pulp chamber caused by different light curing sources with different bonding agents and their corresponding resin cements. The results of the study showed that the light sources have a significant influence on the rise of temperature during the curing of bonding agents and their dual cure resin cements. Choice of bonding agent and resin cement does not cause statistically significant difference in the temperature rise with the given light source. Sufficient time interval should be given between curing of bonding agents and curing of their corresponding resin cements. The rise of temperature in all the groups may not affect the pulpal health as they were well within the critical temperature of 5.5ºC. This book should be useful to the dental practitioners and students using the dual cure resin cement.
"synopsis" may belong to another edition of this title.
About the Author
Dr. Rajmohan C S, MDS Course director in Fixed Prosthodontics and Implantology, at Oman Dental College, Muscat, is an award winning speaker in both national and state level conferences in India and has been teaching for last 7 years. Published several research and case reports and contributed in the textbook of Preclinical manual of Prosthodontics.
"About this title" may belong to another edition of this title.
- PublisherLAP LAMBERT Academic Publishing
- Publication date2013
- ISBN 10 3659443492
- ISBN 13 9783659443497
- BindingPaperback
- LanguageEnglish
- Number of pages52
Buy New
View this item
£ 20.97
£ 9.37 shipping from Germany to United Kingdom
Destination, rates & speedsSearch results for Measurement of pulpal temperature while using resin...
Seller Image
Measurement of pulpal temperature while using resin luting cements
Published by
LAP LAMBERT Academic Publishing Nov 2013, 2013
ISBN 10: 3659443492
ISBN 13: 9783659443497
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The desire for tooth colour restorations has moulded the evolution of aesthetic dentistry to its present challenging form. Presently, ceramics are one of the materials of choice which need dual cure resin cements. These cements during polymerization results in a temperature rise from exothermic reaction and light curing unit. Hence the objective is to compare the temperature rise in the pulp chamber caused by different light curing sources with different bonding agents and their corresponding resin cements. The results of the study showed that the light sources have a significant influence on the rise of temperature during the curing of bonding agents and their dual cure resin cements. Choice of bonding agent and resin cement does not cause statistically significant difference in the temperature rise with the given light source. Sufficient time interval should be given between curing of bonding agents and curing of their corresponding resin cements. The rise of temperature in all the groups may not affect the pulpal health as they were well within the critical temperature of 5.5ºC. This book should be useful to the dental practitioners and students using the dual cure resin cement. 52 pp. Englisch. Seller Inventory # 9783659443497
Quantity: 2 available
Seller Image
Measurement of pulpal temperature while using resin luting cements : Temperature rise caused while luting ceramic restoration with various resin cements, bonding agents and light sources
Published by
LAP LAMBERT Academic Publishing, 2013
ISBN 10: 3659443492
ISBN 13: 9783659443497
New
Taschenbuch
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The desire for tooth colour restorations has moulded the evolution of aesthetic dentistry to its present challenging form. Presently, ceramics are one of the materials of choice which need dual cure resin cements. These cements during polymerization results in a temperature rise from exothermic reaction and light curing unit. Hence the objective is to compare the temperature rise in the pulp chamber caused by different light curing sources with different bonding agents and their corresponding resin cements. The results of the study showed that the light sources have a significant influence on the rise of temperature during the curing of bonding agents and their dual cure resin cements. Choice of bonding agent and resin cement does not cause statistically significant difference in the temperature rise with the given light source. Sufficient time interval should be given between curing of bonding agents and curing of their corresponding resin cements. The rise of temperature in all the groups may not affect the pulpal health as they were well within the critical temperature of 5.5ºC. This book should be useful to the dental practitioners and students using the dual cure resin cement. Seller Inventory # 9783659443497
Quantity: 1 available
Seller Image
Measurement of pulpal temperature while using resin luting cements
Published by
LAP LAMBERT Academic Publishing, 2013
ISBN 10: 3659443492
ISBN 13: 9783659443497
New
Softcover
Seller: moluna, Greven, Germany
Seller rating 5 out of 5 stars
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Rajmohan Chidambaram SivamaniDr. Rajmohan C S, MDS Course director in Fixed Prosthodontics and Implantology, at Oman Dental College, Muscat, is an award winning speaker in both national and state level conferences in India and has be. Seller Inventory # 5156561
Quantity: Over 20 available
Seller Image
Measurement of pulpal temperature while using resin luting cements
Published by
LAP LAMBERT Academic Publishing Nov 2013, 2013
ISBN 10: 3659443492
ISBN 13: 9783659443497
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Neuware -The desire for tooth colour restorations has moulded the evolution of aesthetic dentistry to its present challenging form. Presently, ceramics are one of the materials of choice which need dual cure resin cements. These cements during polymerization results in a temperature rise from exothermic reaction and light curing unit. Hence the objective is to compare the temperature rise in the pulp chamber caused by different light curing sources with different bonding agents and their corresponding resin cements. The results of the study showed that the light sources have a significant influence on the rise of temperature during the curing of bonding agents and their dual cure resin cements. Choice of bonding agent and resin cement does not cause statistically significant difference in the temperature rise with the given light source. Sufficient time interval should be given between curing of bonding agents and curing of their corresponding resin cements. The rise of temperature in all the groups may not affect the pulpal health as they were well within the critical temperature of 5.5ºC. This book should be useful to the dental practitioners and students using the dual cure resin cement.Books on Demand GmbH, Überseering 33, 22297 Hamburg 52 pp. Englisch. Seller Inventory # 9783659443497
Quantity: 2 available