Computer Aided Design (CAD) technology plays a key role in today's advanced manufacturing environment. To reduce the time to market, achieve zero defect quality the at first production, and use available production and logistics resources effectively, product and design process knowledge covering the whole product life cycle must be used throughout product design. Once generated, this intensive design knowledge should be made available to later life cycle activities. Due to the increasing concern about global environmental issues and rapidly changing economical situation worldwide, design must exhibit high performance not only in quality and productivity, but also in life cycle issues, including extended producer's liability. This requires designers and engineers to use various kinds of design knowledge intensively during product design and to generate design information for use in later stages of the product life cycle such as production, distribution, operation, maintenance, reclamation, and recycling. Therefore, future CAD systems must incorporate product and design process knowledge, which is not explicitly dealt with in the current systems, in their design tools and design object models.
"synopsis" may belong to another edition of this title.
Susan Finger is a Professor at the Department of Civil Engineering, Carnegie Mellon University, Pittsburgh, PA, USA. Tetsuo Tomiyama is a Professor at RACE, The University of Tokyo, Japan. Martti Mäntylä is a Professor at the Laboratory of Information Processing Science, Helsinki University of Technology, Finland.
"About this title" may belong to another edition of this title.
FREE shipping within United Kingdom
Destination, rates & speeds£ 22.01 shipping from U.S.A. to United Kingdom
Destination, rates & speedsSeller: BOOKWEST, Phoenix, AZ, U.S.A.
Hardcover. Condition: New. US SELLER SHIPS FAST FROM USA. Seller Inventory # DOM-150C1-HC-4779-2-lb-2005-B10
Quantity: 1 available
Seller: AwesomeBooks, Wallingford, United Kingdom
hardcover. Condition: Very Good. Knowledge Intensive Computer Aided Design: IFIP TC5 WG5.2 Third Workshop on Knowledge Intensive CAD December 1â"4, 1998, Tokyo, Japan: 33 (IFIP Advances in Information and Communication Technology, 33) This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. . Seller Inventory # 7719-9780792386940
Quantity: 1 available
Seller: Bahamut Media, Reading, United Kingdom
hardcover. Condition: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee. Seller Inventory # 6545-9780792386940
Quantity: 1 available
Seller: moluna, Greven, Germany
Gebunden. Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Susan Finger is a Professor at the Department of Civil Engineering, Carnegie Mellon University, Pittsburgh, PA, USA.Tetsuo Tomiyama is a Professor at RACE, The University of Tokyo, Japan.Martti Maentylae is a Professor at the Labora. Seller Inventory # 5971085
Quantity: Over 20 available
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Condition: New. In. Seller Inventory # ria9780792386940_new
Quantity: Over 20 available
Seller: AHA-BUCH GmbH, Einbeck, Germany
Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Computer Aided Design (CAD) technology plays a key role in today's advanced manufacturing environment. To reduce the time to market, achieve zero defect quality the at first production, and use available production and logistics resources effectively, product and design process knowledge covering the whole product life cycle must be used throughout product design. Once generated, this intensive design knowledge should be made available to later life cycle activities. Due to the increasing concern about global environmental issues and rapidly changing economical situation worldwide, design must exhibit high performance not only in quality and productivity, but also in life cycle issues, including extended producer's liability. This requires designers and engineers to use various kinds of design knowledge intensively during product design and to generate design information for use in later stages of the product life cycle such as production, distribution, operation, maintenance, reclamation, and recycling. Therefore, future CAD systems must incorporate product and design process knowledge, which is not explicitly dealt with in the current systems, in their design tools and design object models. Seller Inventory # 9780792386940
Quantity: 1 available
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Buch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Computer Aided Design (CAD) technology plays a key role in today's advanced manufacturing environment. To reduce the time to market, achieve zero defect quality the at first production, and use available production and logistics resources effectively, product and design process knowledge covering the whole product life cycle must be used throughout product design. Once generated, this intensive design knowledge should be made available to later life cycle activities. Due to the increasing concern about global environmental issues and rapidly changing economical situation worldwide, design must exhibit high performance not only in quality and productivity, but also in life cycle issues, including extended producer's liability. This requires designers and engineers to use various kinds of design knowledge intensively during product design and to generate design information for use in later stages of the product life cycle such as production, distribution, operation, maintenance, reclamation, and recycling. Therefore, future CAD systems must incorporate product and design process knowledge, which is not explicitly dealt with in the current systems, in their design tools and design object models. 344 pp. Englisch. Seller Inventory # 9780792386940
Quantity: 1 available
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Buch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This state-of-the-art book explores the concept of knowledge-intensive CAD systems. The topics covered range from ontology to knowledge representation, making it essential reading for researchers, engineers, and technical managers involved in the development of advanced applications for knowledge management, engineering design, and manufacturing. 344 pp. Englisch. Seller Inventory # 9780792386940
Quantity: 2 available
Seller: Lucky's Textbooks, Dallas, TX, U.S.A.
Condition: New. Seller Inventory # ABLIING23Feb2416190185473
Quantity: Over 20 available
Seller: Mispah books, Redhill, SURRE, United Kingdom
Hardcover. Condition: Like New. Like New. book. Seller Inventory # ERICA79707923869496
Quantity: 1 available