Powder Surface Area and Porosity: 2 (Particle Technology Series, 2) - Hardcover

Lowell, S.; Shields, Joan E.

Hardcover

ISBN 10: 0412396904 ISBN 13: 9780412396908

Publisher: Springer, 1991

Synopsis

The rapid growth of interest in powders and their surface properties in many diverse industries prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. It is intended as an introduction to some of the elementary theory and experimental methods used to study the surface area, porosity, density, and particle size of powders. It may be found useful by those with little or no training in solid surfaces who have the need to learn quickly the rudiments of surface area, density, pore size, and particle size measurements. S. Lowell J.E. Shields Symbols Use of symbols for purposes other than those indicated in the following table are so defined in the text. Some symbols not shown in the table are also defined in the text. d adsorbate cross-sectional area A area; condensation coefficient; collision frequency C BET constant c concentration D diameter; coefficient of thermal diffusion E adsorption potential permeability aspect factor f F flow rate; force; feed rate g gravitational constant G Gibbs free energy S G free surface energy h heat of immersion per unit area; height H enthalpy heat of immersion Hi heat of adsorption Hsv BET intercept; filament current k thermal conductivity; specific reaction rate K Harkins-Jura constant C length L heat of liquefaction M mass M molecular weight MPa megapascals number of moles n number of molecules; number of particles N N Avogadro's num'ber molecular collisions per square cm per second

About this title

Synopsis

An increasing number of industries now deal with materials in powder form. The surface area and porosity of powders are characteristics of particular importance in their industrial use. The previous edition of "Powder Surface Area and Porosity" continues to provide an introduction to the experimental methods used to study these properties and a handbook for those needing practical guidance on measurement of surface area, density, particle size and pore size. Particular features in this edition include an extended discussion of micropore analysis and an introduction to methods of particle size measurement, including sedimentation techniques. Part I of the book covers the important theories associated with the measurement of surface area and porosity, discussing gas adsorption, Langmuir and Brunauer, Emmett and Teller theories, adsorbate cross-sectional areas, Harkins and Jura methods, pore analysis by adsorption, microporosity, mercury porosimetry and sedimentation techniques.

Part II describes and compares various experimental methods, including vacuum volumetric measurements, dynamic gravimetric and adsorption methods, mercury porosimetry, density measurements and sedimentation techniques. This book should be of interest to powder technology specialists in industry and academia, and graduate students in chemical engineering.

Edition details

• Publisher: Springer
• Publication date: 1991
• ISBN 10: 0412396904
• ISBN 13: 9780412396908
• Binding: Hardcover
• Language: English
• Edition number: 3
• Number of pages: 264