This book presents the foundations and applications of statics by emphasizing the importance of visual analysis of topics—especially through the use of free body diagrams. It also promotes a problem-solving approach to solving examples through its strategy, solution, and discussion format. The authors further include design and computational examples that help integrate these ABET 2000 requirements. Features strong coverage of free-body and kinetic diagrmas. Includes a revised discussion of reference frames. Chapter topics include: Motion of a Point; Force, Mass, and Acceleration; Energy Methods; Momentum Methods; Planar Kinematics of Rigid Bodies; Planar Dynamics of Rigid Bodies; Energy and Momentum in Rigid Body Dynamics; Three-Dimensional Kinematics and Dynamics of Rigid Bodies; Vibrations. For professionals in mechanical, civil, aeronautical, or engineering mechanics fields.
"synopsis" may belong to another edition of this title.
Anthony Bedford is Professor of Aerospace Engineering and Engineering Mechanics at the University of Texas at Austin. He received his B.S. degree at the University of Texas at Austin, his M.S. degree at the California Institute of Technology, and his Ph.D. degree at Rice University in 1967. He has industrial experience at Douglas Aircraft Company and at TRW, where he did structural dynamics and trajectory analyses for the Apollo program. He has been on the faculty of the University of Texas at Austin since 1968. He is a member of the University of Texas Academy of Distinguished Teachers and has received several teaching awards over the years.
Dr. Bedford's main professional activity has been education and research in engineering mechanics. He has been principal investigator on grants from the National Science Foundation and the Office of Naval Research, and from 1973 until 1983 was a consultant to Sandia National Laboratories, Albuquerque, New Mexico. His other books include Hamilton's Principle in Continuum Mechanics, Introduction to Elastic Wave Propagation (with D.S. Drumheller), and Mechanics of Materials (with K.M. Liechti).
Wallace T. Fowler holds the Paul D. and Betty Robertson Meek Professorship in Engineering in the Department of Aerospace Engineering and Engineering Mechanics at the University of Texas at Austin. Dr. Fowler received his B.A., M.S., and Ph.D. degrees at the University of Texas at Austin, and has been on the faculty there since 1965. During Fall 1976, he was on the staff of the United States Air Force Test Pilot School, Edwards Air Force Base, California, and in 1981-1982 he was a visiting professor at the United States Air Force Academy. Since 1991 he has been Associate Director of the Texas Space Grant Consortium.
Dr. Fowler's areas of teaching and research are dynamics, orbital mechanics, anti spacecraft mission design. He is author or coauthor of technical papers on trajectory optimization, attitude dynamics, and space mission planning and has also published papers on the theory and practice of engineering teaching. He has received numerous teaching awards including the Chancellor's Council Outstanding Teaching Award, the General Dynamics Teaching Excellence Award, the Halliburton Education Foundation Award of Excellence, the ASEE Fred Merryfleld Design Award, and the AIAA-ASEE Distinguished Aerospace Educator. Award. He is a member of the Academy of Distinguished Teachers at the University of Texas at Austin. He is a licensed professional engineer, a member of several technical societies, and a Fellow of both the American Institute of Aeronautics and Astronautics and the American Society for Engineering Education. In 2000-2001, he served as president of the American Society for Engineering Education.Excerpt. © Reprinted by permission. All rights reserved.:
Our original objective in writing this book was to present the foundations and applications of dynamics as we do in the classroom. We used many sequences of figures, emulating the gradual development of a figure by a teacher explaining a concept. We stressed the importance of visual analysis in gaining understanding, especially through the use of free-body diagrams. Because inspiration is so conducive to learning, we based many of our examples and problems on a variety of modern engineering applications. With encouragement and help from many students and fellow teachers who have used the book, we continue and expand upon these themes in this edition.
Examples that Teach
The Strategy/Solution/Discussion framework employed in most of our examples is designed to emphasize the critical importance of good problem-solving skills. Our objective is to teach students how to approach problems and critically judge the results.
Engineering DesignWe include simple design considerations in many examples and problems without compromising emphasis on fundamental mechanics. Design problems are marked with a D icon. Optional examples titled "Application to Engineering" provide more detailed discussions of the uses of dynamics in engineering design.
Some instructors prefer to teach dynamics without requiring the use of a computer. Others use dynamics as an opportunity to introduce students to the use of computers in engineering, having them either write their own programs in a lower level language or use higher level problem-solving software. Our book is suitable for each of these approaches. We provide optional, self-contained "Computational Mechanics" sections with examples and problems designed for solution by a programmable calculator or computer. In addition, tutorials on using Mathcad® and MATLAB® in engineering mechanics are available from our text's website. See Supplements (page xv) for a further description.
Consistent Use of Color
To help students recognize and interpret elements of figures, we use consistent identifying colors.
New to the Third Edition
Positive responses from users and reviewers have led us to retain the basic organization, content, and features of the first edition. During our preparation of this edition, we examined how we presented each concept, example, figure, summary statement, and problem. Where necessary, we made changes, additions, or deletions to simplify and clarify the presentation. In response to requests, we made the following notable changes:
Commitment to Students and Instructors
In revising the textbook and solutions manual, we have taken precautions to ensure accuracy to the best of our ability. We have each solved the new problems in an effort to be sure that their answers are correct and that they are of an appropriate level of difficulty. Karim Nohra of the University of South Florida also checked the text, examples, problems and solutions manual. Any errors that remain are the responsibility of the authors. We welcome communication from students and instructors concerning errors or areas for improvement. Our mailing address is Department of Aerospace Engineering and Engineering Mechanics, University of Texas at Austin, Austin, Texas 78712. Our electronic mail address is email@example.com.
Web Assessment Software lets students solve problems from the text with randomized variables so each student solves a slightly different problem. After students have submitted their answers, they receive the correct answers and, if necessary, can continue to attempt similar problems until they are successful. By integrating with an optional course management system, professors can have student results recorded electronically. Students may also print random problem sets for submission and traditional grading. Contact your Prentice Hall representative for more information and for instructor's passwords. This site is password protected—student passwords appear in each text's accompanying Dynamics Study Pack.
Dynamics Study Pack is designed to give students the tools to improve their study skills. The Dynamics Study Pack comes bundled at no additional cost with every Third Edition of Dynamics sold in bookstores. It consists of three study components—a free body-diagram workbook, a Visualization CD based on Working Model Software, and an access code to a website with 500 sample Statics and Dynamics problems and solutions.
The Dynamics Study Pack is available as a stand-alone item. Order Study Packs with the ISBN 0-13-093235-3.
MATLAB®/Mathcad® Tutorials. These tutorials showing how to use computational software in engineering mechanics. Each tutorial discusses a basic mechanics concept, and then shows how to solve a specific problem related to this concept using MATLAB/Mathcad. There are twenty tutorials each for MATLAB and Mathcad, and are available in PDF format from the password-protected area of the Bedford website. Passwords appear in each student study pack. Worksheets were developed by Ronald Larsen and Stephen Hunt of Montana State University-Bozeman.
Website—http://www.prenhall.com/bedford contains multiple-choice and True/False quizzes keyed to each chapter in the book developed by Karim Nohra of the University of South Florida. Web Assessment, MATLAS/Mathcad tutorials, and Study Pack questions and solutions are all available at the password protected part of this website. Passwords for the protected portion are printed in the Dynamics Study Pack.
ESouree ACCESS. Students can obtain a password to access an over 5000-page on-line database of Introductory Engineering titles. Topics in the database include mathematics review, MATLAB, Mathcad, Excel, programming languages, engineering design, and many more. This database is fully searchable and available 24 hours a day from the web. To learn more, visit http://www.prenhall.com/esource. Contact either your sales representative or firstname.lastname@example.org for pricing and bundling options.
ADAMS Simulations for Dynamics—Mechanical Dynamics, Inc. has created over 100 simulations of problems from Dynamics using their ADAMS simulation/prototyping software. Professors and students can simulate and observe the effects of changing parameters in systems and gain deeper insight into their behavior. Simulations also cone with an accompanying avi "movie" file. Files are located at the password protected part of the website—students use their study pack passwords, and professors should contact their rep for professor access. Qualified adopters may also be able to obtain free site licenses. Contact email@example.com for more information.
Instructor's Solutions Manual and Presentation CD. These supplements, available only to instructors, contain complete solutions to all of the problems and several sample syllabi. Each solution comes with problem statement as well as associated artwork. The accompanying CD contains PowerPoint slides of art from examples and text passages, as well as pdf files of all the art from the book and solutions files.
Course Management. Prentice Hall will be supporting Bedford/Fowler with several course management options. Contact your sales representative or firstname.lastname@example.org for complete information including prices and availability, dates as well as how to use course management with our web assessment software.
"About this title" may belong to another edition of this title.
Book Description Prentice Hall, 2001. Hardcover. Book Condition: New. book. Bookseller Inventory # 130416541
Book Description Prentice Hall, 2001. Hardcover. Book Condition: New. book. Bookseller Inventory # 0130416541
Book Description Hardcover. Book Condition: BRAND NEW. BRAND NEW. Fast Shipping. Prompt Customer Service. Satisfaction guaranteed. Bookseller Inventory # 0130416541BNA
Book Description Book Condition: Brand New. Book Condition: Brand New. Bookseller Inventory # 97801304165441.0
Book Description Prentice Hall, 2001. Hardcover. Book Condition: New. Bookseller Inventory # P110130416541
Book Description Prentice Hall, 2001. Hardcover. Book Condition: New. 3. Bookseller Inventory # DADAX0130416541
Book Description Prentice Hall. Hardcover. Book Condition: New. 0130416541 New Condition. Bookseller Inventory # NEW6.0043746